State Route 520 Floating Bridge
In March 2016, Washington State in northwest America officially opened the world’s longest floating bridge. The ‘State Route 520 Bridge’ (SR520), as it is known, is a six-lane pontoon structure 2.4 km in length. It was constructed as part of the ‘Connecting Washington’ package of measures, Washington State’s largest and greenest transportation investment.
It replaced a four-lane bridge that was completed in the early-1960s. The bridge boasts bigger and stronger pontoons and anchors than the previous bridge, along with a stormwater collection and treatment system to help improve the water quality of Lake Washington. A bus and carpool lane flows in either direction, as well as a 14 ft-wide bicycle and pedestrian path.
Floating bridges are constructed on large water-tight concrete pontoons rigidly connected end-to-end, upon which the road deck is constructed. Individual bridge pontoons are built on the land before being floated and towed to the bridge site. Once there, they are connected at each end to grounded approach structures, starting at the edge of the floating structure and then pieced together towards the bridge’s centre. Enormous cables hundreds of feet long hold the pontoons in place, connected to anchors buried deep in the lake bed.
A more conventional suspension bridge was not suitable for the location as the deepest point of Lake Washington is 214 ft, meaning that the bridge’s support towers would have to be approximately 630 ft tall, nearly the same height as the Space Needle.
The use of floating bridges is typically limited by the wind and wave forces that are likely to be experienced. The ‘fetch’ is the unobstructed clear distance over the water that wind can travel to the bridge. The longer the fetch, the higher the wind and wave forces will be. Pontoons bend, heave and twist as a result of wind and wave forces, creating large stresses in the pontoons and anchor system. However, even in the event of a ‘100-year storm’ (a storm that statistically has 1% chance of occurring in any given year), the pontoons are designed so that they will not crack, and so the bridge will not sink.
[edit] Related articles on Designing Buildings Wiki
- 7 Engineering Wonders of the World.
- Akashi Kaikyo Bridge.
- Bridge construction.
- Bridges of the world.
- Caisson.
- Chesapeake Bay Bridge-Tunnel.
- Civil engineer.
- Cofferdam.
- Driven piles.
- Illusionist bridge.
- Lucky Knot Bridge.
- Nine Elms to Pimlico bridge.
- Pile foundations.
- Pontoon bridge.
- Queensferry Crossing.
- River engineering.
- Thames barrier.
- The Iron Bridge.
- The Millau Viaduct.
- Water engineering.
[edit] External references
- Washington State - Bridge facts
Featured articles and news
Twas the site before Christmas...
A rhyme for the industry and a thankyou to our supporters.
Plumbing and heating systems in schools
New apprentice pay rates coming into effect in the new year
Addressing the impact of recent national minimum wage changes.
EBSSA support for the new industry competence structure
The Engineering and Building Services Skills Authority, in working group 2.
Notes from BSRIA Sustainable Futures briefing
From carbon down to the all important customer: Redefining Retrofit for Net Zero Living.
Principal Designer: A New Opportunity for Architects
ACA launches a Principal Designer Register for architects.
A new government plan for housing and nature recovery
Exploring a new housing and infrastructure nature recovery framework.
Leveraging technology to enhance prospects for students
A case study on the significance of the Autodesk Revit certification.
Fundamental Review of Building Regulations Guidance
Announced during commons debate on the Grenfell Inquiry Phase 2 report.
CIAT responds to the updated National Planning Policy Framework
With key changes in the revised NPPF outlined.
Councils and communities highlighted for delivery of common-sense housing in planning overhaul
As government follows up with mandatory housing targets.
CIOB photographic competition final images revealed
Art of Building produces stunning images for another year.
HSE prosecutes company for putting workers at risk
Roofing company fined and its director sentenced.
Strategic restructure to transform industry competence
EBSSA becomes part of a new industry competence structure.
Major overhaul of planning committees proposed by government
Planning decisions set to be fast-tracked to tackle the housing crisis.
Industry Competence Steering Group restructure
ICSG transitions to the Industry Competence Committee (ICC) under the Building Safety Regulator (BSR).
Principal Contractor Competency Certification Scheme
CIOB PCCCS competence framework for Principal Contractors.
The CIAT Principal Designer register
Issues explained via a series of FAQs.